TORCHVIEW CDVR-1608CDRW User Manual Download

Page: 40 / 49

Playback Button Functions

Button Function

•

Decrease playback speed ( 1x

→

1/4x

→

1/8x

→

1/16x )

•

Regain playback speed ( 16x

→

1/8x

→

1/4x

→

1x )

•

Correct bad video conditions.

•

Correct image distortion during still frame playback.

※

Operates only on monitors with vertical size above 480(NTSC)/576(PAL).

•

Turn On/Off audio recording.

•

Save the current video image during playback.

•

Fast reverse playback ( 2x

→

16x

→

32x )

•

Fast forward playback ( 2x

→

16x

→

32x )

•

Pause video during playback.

•

Paused video will resume playback at the speed it was being played if the

button is re-clicked.

•

Frame by frame forward playback.

•

Frame by frame reverse playback.

•

Pause playback.

•

Recording indicator. (The dot will blink in red during recording)

•

1x Playback in forward/reverse direction.

Playback Information

•

Channel, Date, and Time Information of the video clip being played will be displayed in this window.

Operation

Summary of Contents for CDVR-1608CDRW


















































Search results

Summary of Contents for CDVR-1608CDRW

Reviews:

Related manuals for CDVR-1608CDRW

Brands by name

Popular brands

TORCHVIEW CDVR-1608CDRW, User Manual

Search results

Summary of Contents for CDVR-1608CDRW

Reviews:

Related manuals for CDVR-1608CDRW

Brands by name

Popular brands