泰智科技
Shenzhen Topwisdom Technology Co., Ltd
55
Fig. 4-25
After the steps above, the settings are completed, but please do note that when
inputting text, as shown in the figure below, after the text inputting tool is selected, the
menu shown in Figure Fig. 4-26 will appear when inputting text.
Fig. 4-26
Then you just let it adopt the default font shown in Figure Fig.4-26. Do not select the
English fonts or Song typeface or boldface etc. from the pull-down menu, for those
may not be supported by our software temporarily. After this, our software can support
the engraving output of text in CAD interface.
