泰智科技
Shenzhen Topwisdom Technology Co., Ltd
15
3
WIND
Blow air signal, Low effective
2.4.5 Laser Power Interface
The interface of laser power 1
Pin
Definition
1
+5V
5V power source positive (output)
2
LPWM1
Be used to control the laser power
When the laser is RF laser, used to control the power intensity and On/Off of
the laser
When the laser is CO2 laser, used to control the power intensity
3
LON-1
Laser enable control
When the laser is RF laser, used to control the enable function of laser
When the laser is CO2 laser, used to control laser On/Off
4
WP1
Laser status, the corresponding instruction is LED D1
When the laser is RF laser, used to the state input of laser
When the laser is CO2 laser, used to the state input of water conservation
(active low)
5
GND
+5V power source grounding(output)
The interface of laser power 2
Pin
Definition
1
+5V
+ 5V power source positive (output)
2
LPWM2
Be used to control the laser power
When the laser is RF laser, used to control the power intensity and On/Off of
the laser
When the laser is CO2 laser, used to control the power intensity
