Toptica FemtoFiber pro IR, Manual, Page: 75 / 108

6. Appendix
Page 71
Status: 6.9.18
6.3.3.5 MC 110 Module (Motor Controller)
Figure 61 Front panel of the MC 110 module
The Motor Controller MC 110 controls the motion of the linear translation stage mounted inside the
FemtoFiber
®
pro laser head, which serves to coarsely adjust the repetition rate of the laser. Whenever the
piezo voltage leaves a predefined interval around its middle value, the computer sends a trigger signal
to the motor controller and the translation stage is set into motion.
Connections:
• Use the supplied SMB to D-SUB 9 cable to connect the Motor Stage of the FemtoFiber
®
pro laser
head to the Motor connector at the MC 110 front panel.