Toptica FemtoFiber pro IR, Manual, Page: 71 / 108

6. Appendix
Page 67
Status: 6.9.18
6.3.3 LRC Plug in Modules
6.3.3.1 RF Input Amplification Module
Figure 57 RF Input Amplification Module
The RF Input Amplification Module preamplifies the RF input signals for the PHD 110 module.
Connections:
• Connect the first radio frequency input (RF1 in) to the Monitor SMA-connector at the FemtoFiber
®
pro laser head. Use the supplied coaxial cable with SMA/BNC connectors.
• Connect RF1 out of the RF Input Amplification Module to the RF1 connector on the PHD 110 mod-
ule. Use the supplied coaxial cable with BNC/SMA connectors.
• Connect the second radio frequency input (RF2 in) to your existing reference oscillator.
• Connect RF2 out of the RF Input Amplification Module to the RF2 connector on the PHD 110 mod-
ule. Use the supplied coaxial cable with BNC/SMA connectors.