GT08 GPS Motorcycle/Vehicle Tracker User Manual
Page
7
Restore the Stopped Car to Normal Status
SMS command:
111111RES
(or
111111res
)
This instruction is used to restore the car to normal status after stopping the
car.
Monitor the Voice around the Car
SMS command:
111111MONP
This instruction is used to monitor the voice around the car. The SIM card
inside the system pays for the communication fee.
The P is the telephone which is used to monitor the voice. When user send
out this SMS to the system, the system will call back the telephone P, user could
listen in the voice around the car upon picking up the call.
If you use the present mobile to carry out the monitoring, you can let the P
as blank, sending
111111MON
is OK.
Example: P =13780012345. If user sends 111111MON13780012345 to system, the
system will call back the phone 13780012345 immediately. Once upon pickup the call from
the system, user can hear the voice around.
SMS command:
111111MON:P1*P2*P3*
This instruction is used to program the phone number which is used for
carrying out direct monitoring or talking always.
User uses this phone number to call the tracker, it will be connected
automatically. By this way, user can monitor the voice freely.
Example: 111111MON:13922713571*
Note: If the phone is the same as the first alarm-received phone (111111*10
Mobile #1*20 Mobile #2*), the calling from this telephone can only be
arm/disarm the tracker.
SMS command:
111111MON!
This instruction is used to monitor the voice around the car. The user
‟s
telephone pays for the communication fee.
Example: User uses the mobile 13780012345 to send 111111MON! to the system,
then use the mobile 13780012345 to call the tracker, it will be connected automatically, and
user can monitor the voice around.
