TOPTEK TOPVERT L1 Series, Quick Start Manual

Page: 27 / 67

TOPVERT L1 Series
E-
26
Pr6-12
Speed Search Frequency
(FWD direction)
0.00
～
600.00 Hz
60.00/50.00
Pr6-13
Speed Search Frequency
(REV direction)
0.00
～
600.00 Hz
60.00/50.00
Pr6-14 Dwell Time at Accel. 0.00~60.00 Sec 0.00
Pr6-15 Dwell Frequency at Accel. 0.00
～
600.00 Hz 6.00
Pr6-16 Dwell Time at Decel. 0.00~60.00 Sec 0.00
Pr6-17 Dwell Frequency at Decel. 0.00
～
600.00 Hz 6.00
Pr6-18 Dwell Frequency current Amp (0~150% of rated current) A (0%)
Pr6-19 Traverse Skip Frequency 0.00~100.00Hz 0.00
Pr6-20 The Amplitude of traverse 0.00~200.00Hz 0.00
Group 7: High-function Parameters (PID and Communication)
Parame
ters
Functions Settings
Factory
Setting
User
Pr7-00 Proportional Gain (P) 0.0
～
500.0% 80.0
Pr7-01 Integral Time (I)
0.00
～
100.00 Sec
1.00
0.00 ： no integral
Pr7-02 Derivative Control (D) 0.00 ～ 5.00 Sec 0.00
Pr7-03 Upper limit for Integral Control 0.0
～
100.0% 100.0
Pr7-04 PID Output Frequency Limit 0.0
～
100.0% 100.0
Pr7-05 PID Offset -100.0~+100.0% 0.0
Pr7-06 Primary Delay Filter Time 0.000~0.100 Sec 0.000
Pr7-07 PID Feedback Signal Detection Time 0.0
～
6000.0 Sec 0.0
Pr7-08
Treatment of the Erroneous PID
Feedback Signals
0: warn and keep operating
0 1: warn and RAMP to stop
2: warn and COAST to stop
Pr7-9
Treatment of Keypad Transmission
Fault 0: Warn and RAMP to stop
0
1: Warn and COAST to stop
Pr7-10 Keypad Transmission Fault detection
0.0: Disable and keep operating
0.0
0.1~60.0 Sec
Pr7-11 Communication Address 1 ～ 254 1
Pr7-12 Transmission Speed (Baud rate) 1.2 ～ 125 Kbps 9.6
Pr7-13
Transmission Fault Treatment
0: warn and keep operating
3
1: warn and RAMP to stop
2: warn and COAST to stop
3: No warning and keep operating
Pr7-14 Time-out Detection
0.0: disabled
0.0
0.1~60.0 Sec
Pr7-15 Communication Protocol
0
：
7,N,2 ASCII 9
：
8,E,2 ASCII
0
1 ： 7,E,1 ASCII 10 ： 8,O,2 ASCII
2
：
7,O,1 ASCII 11
：
8,N,1 RTU
3
：
7,E,2 ASCII 12
：
8,N,2 RTU
4 ： 7,O,2 ASCII 13 ： 8,E,1 RTU
5 ： 8,N,1 ASCII 14 ： 8,O,1 RTU
6
：
8, N,2 ASCII 15
：
8,E,2 RTU
7
：
8,E,1 ASCII 16
：
8,O,2 RTU
8 ： 8,O,1 ASCII