THERMOSTAT OPERATION
3
Caution:
When the battery icon
appears replace your AA
batteries immediately. Failure
to do so may result in your
heating & cooling system
becoming inoperable.
Easy to use controls
LCD Display:
See page 2 for details about this display
read out and icons.
1
2
3
4
5
Light Button (Glow in the Dark):
The glow in the dark light button will
self illuminate for several hours after
exposure to ambient light. This button
turns on the display light when pressed.
Temperature Setpoint Buttons:
Press the
+
or
- buttons to select the
desired room temperature.
Humidity Button:
Use this key to enter the target
humidity setpoint screen.
Refer to the next page for instructions.
6
7
User Buttons:
Use these buttons to set up your
programming options. Refer to the
next page for instructions.
Fan Button:
Select
ON or AUTO. The ON key will run
the fan continuously. The
AUTO key will
cycle the fan on only when the heating or
cooling system is on.
A Note About Programmable Fan:
The programmable fan feature will run the
fan continuously during any time period it
is programmed to be on. This is the best
way to keep the air circulated and to
eliminate hot & cold spots in your building.
System Button:
Selects the operation mode of your
HVAC system. Selecting
HEAT
turns on the heat mode. Selecting
COOL turns on the air conditioning
mode. Selecting
OFF turns both
heating and cooling off. (
EM Heat
will appear as an option if operating
a heat pump.
EM Heat setting will
turn on Emergency Heat.)
6
1
2
3
4
5
7
