User Manual VOXter
®
WL-BT 1006
5
th
February 2009
topsystem Systemhaus GmbH
Page 5
1.3 Fastening and carrying the VOXter
®
during work
On the bottom side of the VOXter
®
, a clip is attached which is used for fastening the device
to a belt. Make sure the device is safely attached in a proper position and cannot move or
drop during work.
1.4 Connecting the headset
Before you can start working with the VOXter
®
, the headset has to be connected. The
headset jack is on the top side of the device. Both jack and plug are marked with a red dot.
The cable is connected properly when both dots are positioned adjacent to each other.
Figure 1: Headset plug and jack
Figure 2: Properly connected headset
2 Basic functions of the VOXter
®
2.1 Switching the device on
The VOXter
®
is switched on by pressing the On/Off switch
on the front of the device. The
device is booting when the middle light (of the three status lights) starts flashing green.
On-/off switch
Select button