User Manual VOXter
®
WL-BT 1006
5
th
February 2009
topsystem Systemhaus GmbH
Page 13
4 General Operations with the VOXter
®
4.1 Logging-in for work
Before you can start working with the VOXter
®
, you have to authorise yourself via log-in.
Depending on the system settings the logging-in is done via voice or keyboard. During the
introduction of the system you will be informed what kind of log-in procedure is used.
When you perform a speech training or a speech test on the VOXter
®
the log-in procedure is
performed on the PDA used for the training or the test.
4.1.1 Logging-in via voice
The logging-in via voice is done as described below:
♦
Switch the VOXter
®
on by pressing the on-/off button
.
♦
Now you hear a speech information via headset stating which feature of the start menu is
currently selected. Depending on the settings, multiple applications might be available to
choose from.
♦
Press the button with the arrow pointing downwards to browse through the available
menu entries.
♦
When the program you want to start is announced, press the Select button
.
♦
Now the user identification is started. Enter your ID per voice through the microphone of
your headset. Please notice that you have to enter single digits. The user ID 123 is
entered by saying "one two three".
♦
You are asked to confirm the entered user ID. Just confirm by saying "OK". Use "Cancel"
if you want correct the user ID.
4.1.2 Logging-in per keyboard
The logging-in per keyboard is done as described below:
♦
Switch the VOXter
®
on by pressing the on-/off button
.
♦
Now you hear a speech information via headset stating which feature of the start menu is
currently selected. Depending on the settings, multiple applications might be available to
choose from.