TOPSCCC EX-92622A, User Manual

Page: 14 / 79

EX-92622A User Manual 14
2.3 Installing the Memory
The Motherboard supports two DDR2 memory socket for a maximum total memory of 2GB in DDR2
memory type.
Installing and Removing Memory Modules
To install the DDR2 modules, locate the memory slot on the board and perform the following steps:
1. Hold the DDR2 module so that the key of the DDR2 module align with those on the memory slot.
2. Gently push the DDR2 module in an upright position until the clips of the slot close to hold the DDR2
module in place when the DDR2 module touches the bottom of the slot.
3. To remove the DDR2 module, press the clips with both hands.
Figure 2.3: Installation of Memory Module