Toppro TPR-5000, User Manual

Page: 29 / 82

4
4.2 Local time setting 21
only one source or both of them in either stereo or mono. Set
the
Sound Mode
option as you desire.
Apart from this setting, you can change the sound mode with
the
button. See §5.2.4 for a detailed description.
The digital receiver can output two types of digital audio sig-
nals via the S/PDIF output. One is an encoded signal, and
the other is a decoded signal. If you have the digital receiver
linked to your audio-video receiver via the S/PDIF output, you
have to set the
Dolby Digital
option to
Off
, which means that the
digital receiver will output encoded Dolby Digital audio with-
out decoding so that your audio-video receiver can decode it.
Otherwise, set it to
On
, then the digital receiver will output
decoded Dolby Digital audio, scaling it down to two channels.
NOTE
Only if the service you are currently watching provides
a Dolby Digital audio track, you can enjoy Dolby Digital
sound.
4.2 Local time setting
You should set your local time for timer events.
Select the
Settings
>
Time
menu. You should see a screen
like the left figure. You can set
the clock manually or use the
time signal, Greenwich Mean
Time (GMT), carried as part of
the digital television broadcast.
To use Greenwich Mean Time,
take the following steps:
1. Set the Mode option to Auto , then the Time Offset option
becomes enabled.