2.5
MODELS
Two models of automation are available:
@
When order a single door panel application, always specify the direction of opening of the door, seen from the front
of the automation.
%
automation with 2 door panels (Fig.2) which allows a pair of door panels to glide simultaneously in opposite
directions;
%
automation with 1 door panels which allows a single door panel to glide in one direction; Fig.3 shows an application
with a single door that opens toward the right (seen from the front of the automation); Fig.4, shows a single door that
opens toward the left (seen from the front of the automation).
@
To comply with the safety regulations, the glide of the door panel
VPA
must be less than the door opening width
VL
.
The glide of the door panel
VPA
is equal to
VL
when the upright on the door does not have any roundings and/or
protrusions that could cause a shearing effect.
VPA*
VL
LT/LC
25
25
75
75
VPA*
VL
LT/LC
25
75
75
VPA*
LT/LC
25
75
75
LT/
LC
LT/L
C
PC
BP
PC
BP
PC
PC
LT/
LC
LT/
LC
PC
BP
BP
PC
Fig.
2
Fig.
3
Fig.
4
7
VPA
= net doorway width
LT/LC
= automation length /
casing length
VL
= gross opening
BP
= rail + runner on the floor
PC
= electric wire raceway
1 RIGHT DOOR PANEL
1 LEFT DOOR PANEL
2 DOOR PANELS
VPA
= net doorway width
PC
= electric wire raceway
LT/LC
= automation length /
casing length
BP
= rail + runner on the floor
VL
= gross opening
BP
= rail + runner on the floor
VPA
= net doorway width
LT/LC
= automation length /
casing length
VL
= gross opening
PC
= electric wire raceway
INSTRUCTIONS FOR INSTALLATION AND USE
EN
K200
