![TOPP K200 Instructions For Installation And Use Manual Download Page 12](http://html.mh-extra.com/html/topp/k200/k200_instructions-for-installation-and-use-manual_1129576012.webp)
3.3
INSTALLING THE ADAPTER AND RAIL
70÷80
40
Door panel
40
45
Adapter
%
Make sure the upper part of the panel crossbar is reinforced at the base (minimum thickness 3 mm);
%
Mark the fastening points on the door using the adapter and rail as a templat;
%
Drill the door panel at the top and fasten the adapter using cylindrical M6 screws or cylindrical self-tapping d5.5 screws
depending on the type of material;
%
Cut the adapter and rail to the measurement of the finished door width, removing another 2 mm from the jamb sider;
@
The number of fastening holes will depend on the size and weight of the door.
%
Drill the door at the bottom and fasten the rail using flared self-tapping cylindrical screws diam. 4.8.
%
Drill the adapter and rail starting at about 70/80 mm from the end;
20
31
Rail
Fig.
10
12
IRON
2 mm (with lesser thickness use threaded rivets)
3 mm (with lesser thickness use threaded rivets)
100 mm
50 mm
Minimum thickness
Materials of the fastening surface
ALUMINUM
SOLID WOOD
REINFORCED CONCRETE
110 mm (with lesser thickness use chemical bolts)
PERFORATED CONCRETE
INSTRUCTIONS FOR INSTALLATION AND USE
EN
K200