TOPP C25, Installation And Use Instructions Manual

Page: 17 / 40

17
EN C25
The actuator was designed and made exclusively to
open and close top hung and bottom hung windows using
a control device. Therefore, in order to ensure the safety
of the fitter and of the user at all times and the efficiency of
the actuator itself, it is absolutely forbidden to use it for
other purposes.
C h e c k c a r e f u l l y a l l e n v i r o n m e n t a l c o n d i t i o n s
(temperature, humidity, wind, snow, potential chemical
agents, etc.) and installation settings (misaligned fitting of
brackets and attachment to the frame, frictions produced
by hinges or gaskets, use of self-balancing window stays,
etc.) it is recommended that they not exceed the actuator
performances shown in the technical table. If they do,
please find an alternative and more suitable product for
your application.
Each standard product package (carton box) has the
following
(Fig.7):
%
N.1 actuator including power supply cord ( Rif.A );
%
N.2 window coupling brackets (right and left) (Rif.B) ;
%
N.1 bracket for “bottom hung window” opening
(Rif.C) ;
%
N.1 small part package (Rif.D) made up of the
following: n°1 quick coupling ( D-1 ) with spacer ( D-2 ),
N.2 inserts to lock the actuator to the coupling brackets
(
D-3 ), N.7 AF screws d4.2 x 19 mm to fasten the
brackets and the quick coupling ( D-4 ), N.1 AF screw
3.4
FORMULAS TO CALCULATE THRUST
FORCE OR TRACTION FORCE
3.5 INTENDED USAGE
3.6
PAKAGE
2
Cupola or horizontal skylights (Fig.3):
F = Force required to open or close
P = Weight of the skylight or cupola (only mobile part)
F = 0,54 x P
Top hung windows (Fig.4) or bottom hung
windows(Fig.5):
F = Force required to open or close
P = Weight of the window (only mobile part)
C = Window opening stroke
H = Window height (only mobile part)
F = (0,54 x P) x (C / H)
d6.3x38 to remove the coupling inserts from the
respective brackets (
D-5 ), n°2 EI screws M6x13 to
fasten the slide guides to the actuator ( Rif.D-6 ), n°1
split pin ( Rif.D-7 ), No. 2 shims (right and left) for
bottom hung windows ( Ref. D-8 ), N.2 slide guides
(Rif.D-9) ;
%
N.1 drill template ( Rif.E );
%
N.1 user and installation instructions (Rif.F);
- N. 1 safety plate ( Fig.6 ).
Make sure that the above stated parts are inside
the package and check to see if the actuator
suffered any damages during transportation. If
there are abnormalities it is forbidden to install
the actuator; the user must contact a reliable
reseller technical assistance service or the
manufacturer.
INSTALLATION AND USE INSTRUCTIONS