Topp Music Gear Event 2K, User Manual

Page: 13 / 39

8
Connection Plate System
Make your initial connections with all the equipment powered off, and ensure that all the main
volume controls are turned completely down.
Two Active Subwoofers & Two Passive Satellite Speakers
1) Connect one side of the signal cable to the output of your mixer (left / right) with a TRS or
XLR connector and the other side of the cable to the line input (combo) in the active
subwoofer (with a TRS to XLR connector). Then connect the speakon cable from the output
of power in the Subwoofer to the satellites input.
2) Complete other connections as illustrated.
3) Turn on your mixer first, then the stereo power amplifier.
4) Turn up the volume controls of your amplifier to about70%.
5) Use PFL function to get the proper input level for the mixer, and adjust the Mian Mix Level
control to manipulate the output level.
6) After using, turn off your stereo power amplifier first, then the mixer.
Signal Cable
Mixer
Signal Cable
Left
Main Mix
Output Right
Main Mix
Output
13