Topp Music Gear Event 2K, User Manual

Page: 10 / 39

7
DSP Control
MENU
The Input Settings menu is used to configure the speaker's input sensitivity control and Delay and Phase
control;
The MIC is used as the Input 1 input sensitivity control. After confirming the MIC input, the MIC light on the
panel will light up.
HI-Z is used as the input 2 input sensitivity control. After confirming the HI-Z input, the HI-Z lamp on the
panel will light up.
The Delay menu is used to create time calibrations with other speakers. The options available for this
selection are: 0 or a maximum delay of 69.19 Feet. The delay can be changed in increments of 0.69 Feet. The
default is 0 Feet.
Phase setting is set for the entire loudspeaker system;
The Factory Presets menu is used to configure the type of sound that the speaker sends. The options
available for this selection are: LIVE, MUSIC, SPEECH, and MONITOR. The MASTER VOL menu button can be
used to configure the presets for different occasions.
- LIVE- for live sound reinforcement applications. (Defaults)
- MUSIC - for recording music playback and EDM applications.
- SPEECH- for vocal language applications.
- MONITOR - for ground monitoring
EQ menu
The EQ menu is a 4-band EQ (equalizer) that the user can fine tune in addition to FUNCTION and LOCATION.
The options available for this selection are: HI, MD, LM, and LO.
Factory Presets
04: SPEECH
05: DJ
EXIT
Input Settings
Are you sure
Switch to Mic ?
Yes No
Input Settings
Are you sure
Switch to High
Resistance ?
Yes No
Input Settings
HI-Z
Phase Exit
Delay: 0 Feet
MIC
Input Settings
Phase Exit
Delay: 0 Feet
MIC HI-Z
Input Settings
Phase Exit
MIC HI-Z
Delay: 69.16 Feet
Factory Presets
01:LIVE
02:MUSIC
03:FLAT
EQ FREQ Q GAIN
HI
MD
LM
LO
12.1K
2.52K
500.0
101.5
HS
3.00
3.00
LS
0.0
0.0
0.0
0.0
EQ FREQ Q GAIN
L0
ALLBPSS
FLAT
Exit
101.5 LS 0.0
NO
10