TOPMAQ MM3156, Owner'S Operating Manual

Page: 15 / 32

１４
Figure 9
2. To adjust the Elevation Tension Adjustment Screws, loosen the lock nuts,
securing each screw in place. Loosen or tighten each screw, as required, in
1/4 turn increments to attain the desired fit and smoothness. Retighten the
lock nuts to secure the tension screws in position.
3. Check the sanding drum to conveyor table alignment by first removing the
abrasive strip from the drum. The purpose of this adjustment is to achieve
equal distances at point A and point B which will ensure that the drum is
parallel to the feed table and provide uniform sanding. (See Figures 10.)
Elevation Tension
Adjustment screws