9
6.
Slowly sweep a sample of the material you want the detector to
find (such as a gold ring or a coin) 2-3 inches or more above the face of
the search coil. When the detector detects any metal, it sounds a tone
and the cursor above the target name will light. Also LCD displays the
numeric value of target as well as the signal strength of it. Please note
that the signal strength is only a reference.
Note:
If you are using a coin, the detector will detect it more easily if you hold
it so a flat side is parallel with the flat side of the search coil. A sweep
with the side of coin over search coil might cause false indication and
unstable display of target.
7. PP(PINPOINT)
After you find a metal object, you can use PP to pinpoint the target. Hold
down PP button. Slowly move the search coil above the sound area.
The detector sounds and the signal indicator on the LCD displays the
level of signal. Then release the button. Sweep the search coil again,
keeping the same distance of search coil, sound disappears. Hold down
PP again, closer the search coil to the sound area, the detector sounds
again. Repeat the above steps until the detector displays the stronger
signal where the location of the target is.
Press MENU to quit the PP mode.
Note:
It
’s normal phenomena that LCD displays 1 or 2 signal bars and
beep sound appears after holding down PP. This will not affect the
operation.
You can hold down and release PP several times to eliminate the
initial weak signals and beeps before pinpointing.
To find the exact location of target, you need to practise more
times.
TARGET INDICATIONS
1. Numeric ranges of target:
- IRON: 00-10
