6
1. VOLUME/POWER switch
Rotate volume control away from OFF to power on the detector.
2.
PHONE
jack: You can insert the
headphones’ plug of 3.5mm into
the PHONE jack and operate without trouble. At this time the
internal speaker is disconnected.
3. LCD DISPLAY
4. CONTROL BUTTONS
MENU:
Press MENU, LCD will display LIGHT, SENS, DISC,
NOTCH. One of the displayed item will flash. If no button is
pressed in about 5 seconds, the flashing item will be selected.
SENS:
Press MENU to select SENS. Then press + or
– to adjust
the level of sensitivity. The level will be displayed on the LCD.
DISC:
Discriminates the unwanted target by setting the numeric
range
.
Press MENU to select DISC. Then press + or
– to adjust the
numeric range of discrimination. The number will be displayed on
the LCD.
NOTCH:
Eliminates the target you don
’t want. Press MENU to
select NOTCH. Then press+ or
– to select the target to be
notched. The cursor above the selected target will flash. Press
NOTCH again, the target name below the cursor will disappear.
PP:
Pinpoints the location of the target accurately.
LIGHT:
Press MENU to select LIGHT. Then press + or
– to adjust
the level (0-9 ) of LIGHT. The level will be displayed on the LCD.
