- 12 -
Fig.19
Fig.20
Fig.21
ALTERNATIVE WHEEL MOUNTING
1. The wheels may also be mounted at the bottom of the support legs, for easier transport on the job site (Fig.
20).
2. Once the wheels are in place, lift the saw with the opposite handle to move the saw (Fig.21).
H. REPLACING THE DIAMOND BLADE
WARNING! Disconnect the power supply before installing or making adjustments to
the diamond blade.
1. CHOICE OF THE SAW BLADE. O
Only use diamond blade with diameter of 200mm, the bore of the
blade must be 22.23mm.
2. REPLACING THE SAW BLADE
A. First, press the blue rings on the water hose connector and remove the water tubes (Fig 22).
B. Remove the blade guard by removing the 2 screws (Fig 23).
C. Use the hexagonal wrench to hold the blade nut and use the spanner wrench provided to hold the shaft.
Loosen the nut turning clockwise as in (Fig 24).
D. Ensure that the shaft and flanges are clean. Mount blade back on to shaft ensuring that the directional
arrow on the blade is rotating towards the material to be cut.
E. Insert flange and lock nut. Tighten counterclockwise.
F.Close
the blade guard and secure the knob.
VII MAINTENANCE
While maintaining and cleaning the machine, pull the plug from the mains socket. Never use water or
other aggressive liquids while cleaning electrical parts of the machine.
●
Periodic
maintenance of the cutting machine after each operating is required. Use soft cloth to
Fig.22
Fig.23
Fig.24