Dust Collector
5
GB
Specific Safety Rules
Intended Use
Do not force tool or attachment to do a job for
which it was not designed.
•
This dust collector is designed to collect
sawdust only.
•
Never attempt to use this dust collector to
vacuum water or any other liquids.
•
Never try to use this dust collector to collect
large wood pieces.
•
Never attempt to use this dust collector
to collect flammable or combustible dust/
gas. Do not use near any flammable or
combustible liquids.
•
Never attempt to use this dust collector to
collect anything that is burning or smoking.
•
Do not use outdoors or on wet surfaces.
Rain or moisture entering the dust collector
motor housing/canister increases the risk of
electrical shock.
•
Never attempt to use this dust collector to
collect metal materials such as screws, nails
or other metal parts.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.
Safety Instructions for the Handling of Dust
Collector
• Know your tool. Learn the tool’s operation,
application and specific limitations.
• Disconnect tool when changing the filter
cartridge or filter bag.
• Avoid accidental start-up. Make sure that the
tool is in the OFF position before plugging
in.
• Do not force tool. It will work most efficiently
at the rate for which it was designed
• Leave hands free to operate machine.
Protect hands from possible injury
• Never leave tool running unattended. Turn
the power off and do not leave tool until it
comes to a complete stop.
• Do not overreach. Keep proper footing and
balance.
• Never stand on tool. Serious injury could
occur if tool is tipped over.
• Keep hands away from moving parts.
• Keep visitors at a safe distance from work
area.
• Children must always be supervised in order
to ensure that they do not play with the
equipment.
Maintenance and Repair
• Pull out the mains plug for any adjustment
or repair tasks.
• Repairs are to be carried out only by a qualified
electrician using original replacement parts
or the user may suffer an accident.
• Regularly inspect the filter for damage.
Replace damaged filters!
• Check tightness of the housing and of the
sealing of filter and filter bag regularly.
• Inspect the power cords for damage on a
regular basis. Make sure that during this
inspection the power cord is not connected
to the mains supply.
• Have damaged switches replaced by a
customer service workshop.
• Refit all guards and safety devices
immediately after you have completed any
repairs or maintenance work.
• Check that the moving parts are in good
21160UK00M100.indd 5
2020/5/13 9:19:54
