Dust Collector
13
GB
TROUBLE SHOOTING
Problem
Cause
Remedy
Device will not start
1. No mains voltage. Main circuit
breaker is tripped
2. On switch (green) / Off
Switch (red) (1) is broken
3. Motor faulty
1. Check the socket, mains supply
cable, cord, mains plug; if
necessary, have them repaired the
main fuse
2. Repair by Customer Care
3. Repair by Customer Care
Motor will not run
1. Defective or broken switch
2. Defective or damaged power
cord
3. Open circuit, loose
connections, or burned out
motor
4. Low voltage
1. Take to a qualified service
technician
2. Take to a qualified service
technician
3. Take to a qualified service
technician
4. Check the power line for the proper
voltage. Use another circuit or have
a qualified one
Motor slow to start
or fails to reach full
speed
1. Burned or defective motor
2. Worn brushes
1. Check motor, replace if necessary
2. Inspect brushes, replace if
necessary
Motor overheats
1. Motor overload
2. Improper motor cooling
1. Reduce load by slowing dust
production
2. Clean sawdust from motor
Tripping circuit
breaker or fuses
1. Motor overloaded
2. Improper capacity of circuit
breaker or fuses
1. Reduce load by slowing dust
production
2. Use proper capacity circuit breaker
or fuse
Unit has vibration
or noisy operation
1. Motor or components are loose
2. Motor bearings faulty
1. Inspect/replace any stripped or
damaged bolts/nuts and retighten
2. Take to a qualified service
technician
21160UK00M100.indd 13
2020/5/13 9:19:57
