Dust Collector
11
GB
Before Starting
1. Place the dust collector near the dust
producing machine on a flatlevel surface.
2. There are four hose adapters supplied. Select
the hose adapter that best fits the dust
producing machine outlet and attach it to the
hose coupler.
To Start
To Stop
Important: Turn dust collector on
before starting dust producing
machine.
Important:ALWAYS turn the dust
producing machine OFF before
turning the dust collector OFF.
3. Connect the dust collector adapter to the
dust producing machine outlet. Make sure
the connection is secure.
4. Make sure the machine is turned OFF.
5. Connect the dust collector's power cord to
the correct power source.
Place the dust collector's ON/OFF switch in
the ON (I) position. Turn the machine ON.
Place the dust collector's ON/OFF switch in
the OFF (O) position. Turn the machine OFF.
DANGER: Make sure the machine
i s t u r n e d o f f a n d t h e c o r d i s
disconnected from the power source
before servicing and removing/
replacing any components on the
machine.
MAINTENANCE
OPERATION
General Maintenance Measures
Pull the mains plug before any adjustments,
maintenance or repair.Have any work on the
device that is not described in this instruction
guide performed by a professional. Only
use original parts. Allow the device to cool
off before any maintenance or cleaning is
undertaken.
Check the dust collector daily for loose
connections, damaged wires, worn switch, full
shavings bag, dirty filter bag and any other
unsafe condition.
Damaged filters and bags must be immediately
changed in order to keep the amount of dust
that escapes into the work environment as low
as possible.
Cleaning
For constant performance, periodically shake
out filter bag vigorously. Between cleanings,
beating the bag with the hand several times is
sufficient.
The shavings bag must be replaced at the
latest when the sawdust is within 10cm of the
housing collar.
Clean the equipment regularly with a damp
cloth and some soft soap. Do not use cleaning
agents or solvents; these could attack the
plastic parts of the equipment. Ensure that no
water can seep into the device. The ingress of
water into an electric tool increases the risk of
an electric shock.
Hose Adapters
21160UK00M100.indd 11
2020/5/13 9:19:57
