background image

POWERED WHEELBARROW

6

GB

reverse gear. Do not rapidly accelerate, turn 
sharply or stop.

Pay the utmost attention when working on 
frozen ground as the machine may tend to 
skid.

Do not operate the machine in confined areas 
where there may be a risk of crushing the 
operator between the machine and another 
object.

The maximum uphill angle of the machine 
is 20°. The maximum downhill angle of 
themachine with the head downward is 6°.

When operating on a slope, whether moving 
forward or in reverse, always make certain 
that the weight is evenly balanced. Always 
move in directions parallel with the slope. Do 
not shift gears on slopes.

When dumping the contents of the hopper, 
the center of gravity will change continuously 
and the ground conditions will be essential for 
the stability of the machine. Use extra caution 
and control when dumping the hopper on e.g. 
wet clay.

Specific Safety Rules 

Thoroughly inspect the area to be worked, 
keep the working area clean and free of debris 
to prevent tripping. Operate on a flat level 
ground.

Never place any part of your body where it 
would be in danger if movement should occur 
during assembly, installation, and operation, 
maintenance, repairing or moving.

Keep all bystanders, children, and pets at least 
23m (75 feet) away. If you are approached, 
stop the unit immediately.

Do not mount anything on the dump box and 
never carry passengers

Never park the machine in a place with 
unstable ground which could give way, 
particularly when it is full.

Disengage clutch lever before starting the 
engine.

Start the engine carefully according to 
instructions and with feet  away from the 
moving parts.

Never leave the operating position when the 
engine is running.

Always hold the unit with both hands when 
operating. Keep a firm grip on the handlebars. 
Be aware that the machine may unexpectedly 
bounce upward or jump forward if the 
machine should strike buried obstacles such 
as large rocks or roots.

Walk, never run with the machine.

Do not overload the machine capacity. Drive 
at a safe speed, adjusting the speed to the 
slope of the land, the surface conditions of 
the road, and the weight of the load.

Use extreme caution when in reverse or 
pulling the machine towards you.

Exercise extreme caution when operating on 
or crossing gravel drives, walks, or roads. Stay 
alert for hidden hazards or traffic.

On soft ground, drive at the first forward/

09618UK00M102_不带档位板-出货版.indd   6

2020/6/10   15:40:35

Summary of Contents for 09618

























Reviews: