background image

2

The Lavac

Congratulations on the purchase of a Lavac
marine toilet. Lavac marine toilets are firm
favourites with sailors throughout the world,
providing their owner with a long and trou-
ble free working life.
The Lavac is one of the most simple to
operate marine toilets available. After use,
the seat and lid are closed and the pump is
then operated for 14-16 strokes (For full
instructions see page 21). As waste is
pumped out, the bowl is sealed causing a
vacuum which draws in the flushing water.
It’s as simple as that!
Within this handbook you will find informa-
tion and practical help on installing, running
and maintaining your Lavac. If you require
any further help or advice, please contact
us either by:

Telephone: 

+44 (0)1489 580580

Fax: 

+44 (0)1489 580581

E-mail: 

[email protected]

or by writing to:

Blakes Lavac Taylors
13 Harvey Crescent
Warsash
Southampton
SO31 9TA
United Kingdom

Over many years we have taken advice from
sailors around the world concerning their
requirements for marine equipment and our
current range is a result of this ongoing com-
mitment. If you have any comments or help-
ful hints that you would like to share with us,
we would be very pleased to hear from you.

Installation kit provided with your lavac

All Lavac marine toilets are provided wit the
following parts for installation.

z

Pump – Hand (T/A: On Bulkhead; U/D:

Behind Bulkhead) or Electric (12 volt DC
or 24 volt DC, including wiring loom, time
switch, fuse and fuse holder)

z

Plastic Bleed Plugs (Spares No.

TLZ9251)

z

Self adhesive operating instructions

z

Owners Handbook.

Because the nature of an installation varies
from owner to owner, certain components
are easier to source locally. We therefore
feel it is best for you to purchase the follow-
ing separately, depending on your require-
ments.

z

4 x 6mm (¼“) diameter Stainless Steel

securing bolts or screws for base

z

4 x 6mm (¼“) diameter Stainless Steel

securing bolts or screws for pump

z

Reinforced sanitation grade hose –

length dependant on installation:
19mm (¾“) bore for inlet
38mm (1½“)bore hose for outlet

z

Hose clips

Summary of Contents for BLAKES LAVAC Popular 4610-000
































Reviews: