Page | 6
V.
OPERATING YOUR TG400R
1. TURN POWER ON
Insert the key into the key switch on the upper tiller and turn on the power.
2. FORWARD MOTION
To move forward, pull the right side of the throttle lever under the control console
toward you. The further you pull, the faster the scooter will go. The maximum
speed may be selected by the speed selection switch located on the top of the
control console.
3. REVERSE MOTION
To reverse, pull the left side of the throttle lever under the control console toward
you. Reverse speed is limited to 4.8 km/h.
4. STOP
To stop the scooter, just release the throttle lever. The TG400R will quietly come
to a smooth stop and electromechanical brake will automatically engage to hold
the scooter in position on horizontal surface or an incline of up to 15 degrees.
Quick smooth stops are made possible by the dynamic braking built in the
controller.
Warning:
The brake may not be as effective when engaged on inclines greater than 15
degrees or 21% if the occupant’s weight exceeds 250kgs
In case the brake fails to engage, the TG400Rs may roll slowly on a slope. Turn
off the power immediately.
5. MOVE MANUALLY
When in operation, the clutch release lever is in its engaged position. To move
the scooter manually, release the clutch lever mounted on the gearbox under the
rear shroud. Should you wish to freewheel theTG400R, pull the lever to its
release position. Or you can press the PUSH button to release the brake. Take
your finger off the PUSH button, and the brake will re-engage.
Clutch Release
