TF91-TRS
7
4
Operation
4.1
Movement operation
Insert the key in the key switch and rotate it in the clockwise direc-
tion: The electric motor starts.
Pull the movement lever: The sweeper moves forward.
If the lever is released, the sweeper remains at standstill.
4.2
Sweeping operation
The height adjustment of the side brushes and the main broomss is
done via levers on the operating console. Each of the side brushes can
be used invdividually.
Start the movement operation.
By lifting and pushing forward the corresponding lever, the side
brushes and/or the main brooms can be deployed in a purposeful
manner.
(Also see "Device description")
1
Operating lever, left side brush
2
Operating lever, main brooms
3
Operating lever, right side brush
4.3
Sweeping wet refuse
For sweeping wet refuse, it is recommended that the fan shutter be
closed, to prevent clogging and softening of the filter.
This is how to adjust the fan shutter.
With the machine switched off, open the hood and fasten it.
To close the fan shutter, rotate the lever -1- to the front position.
To open the fan shutter, you must get the lever -1- into the rear position.
4.4
After sweeping
Switch off the machine.
Summary of Contents for TF91-TRS
Page 1: ...operator manual TF91 TRS vacuum sweeper...
Page 2: ......
Page 5: ...Table of Contents TF91 TRS I...
Page 23: ...TF91 TRS 19...
