8
TF91-TRS
Adjust the side brushes and main brooms in the upper position.
If the main brooms are not set to their top position, the bristles of
the side brushes will be put under permanent load in their off-
position and consequently will wear prematurely when used!
Always empty the dustbin once you've finished sweeping.
4.5
Setting the traversing mechanism
The traversing mechanism can be readjusted at the adjusting screws at
the handle and at the belt tensioner.
Adjust the belt tensioner in such a way that the belt lies loosely on
the handle without tension.
It should be possible to press the belt 4 cm inwards in the middle till the
first resistance is felt.
4.6
Parking the sweeper
Move the machine to an area provided (assigned) for the purpose.
The sweeper does not have any brakes.
Therefore, secure the sweeper against rolling away (e.g: wheel
chocks).
Turn the key in the anticlockwise direction to switch off the motor
and pull out the key.
Improper handling of the suction sweeper can result in harm to
persons and property!
Prevent unauthorised usage of the suction sweeper, by:
never leaving the suction sweeper unattended when it is ready for
operation,
Caution!
Caution!
Summary of Contents for TF91-TRS
Page 1: ...operator manual TF91 TRS vacuum sweeper...
Page 2: ......
Page 5: ...Table of Contents TF91 TRS I...
Page 23: ...TF91 TRS 19...