Topfloor TF100R-TRS, Operator'S Manual, Page: 28 / 40

26 TF100-TRS
3 spring 4 spring
Original roller diameter: 230 mm.
When diameter has decreased to 200 mm, the roller needs to be re-
placed.
5.10.2 Adjustment of the Side Brush
Operational wear necessitates additional adjustment of the side brush-
es.

Park the suction sweeper as described.

Take the key out of the key-operated switch.

Unlatch the lowering lever of the side brushes.

Push down the lowering lever.

Remove the entire main panelling.
1 Screw of the height-
adjustment of the lateral
brushes
2 Back nut

Loosen the back nut.

To lower the lateral brush, you will have to turn the screw of the
height-adjustment of the lateral brushes clockwise.

To raise the lateral brushes, you will have to turn the screw of the
height-adjustment of the lateral brushes counterclockwise.

Set the lateral brushes to their desired position.

Tighten the back nuts. Put on the main panelling.
5.11 Replacing the Side Brush
5.11.1 Dismounting the Side Brush

Park the suction sweeper as described.