Topfloor TF100R-TRS, Operator'S Manual, Page: 25 / 40

TF100-TRS 23
1 Bowden cable 2 adjustment nut
3 back nut 4 brake pulley
5 brake pulley
Now conduct a brake check.
5.9.2 Brake Check
Free Movement of Rear Wheal
You must be able to move the ride-on-suction-sweeper by pushing
when the brake is released. The rear wheel must not be blocked.
Brakes that are set too tightly damage the brake drum.
Correct Operating of Brake
Carefully drive a few meters at moderate speed.
Depress the brake pedal. The ride-on-suction-sweeper must stop.
If the brake check should not render a satisfying result the setting pro-
cedure must be repeated.
Further Setting Possibility:
The Bowden pull wire does not allow tightening in the way described
above any longer.

Loosen the brake pulley arresting.

Lift the brake lever up until it is obstructed.

Hold the brake lever in this position.

Pull the brake pulley down and push the brake pulley arresting up-
ward.

Fasten the brake pulley arresting.

Carry out the above described brake check.
Check the operational reliability of the parking brake

Engage the brake pedal.

Engage the parking brake.

Take your foot off the brake pedal.

The brake pedal must remain in its position.

When pushing by hand, the ride-on-suction-sweeper must not
move.