B. Search Mode
There are 4 search modes, Auto, Manual, Advanced, and SMATV.The Auto mode
enables to search using the information the IRD has. On the other hand, there will
be a need to know in advance the frequencies and the symbol rates before using
the Manual mode. On the Advanced mode, enter either the Audio PID, Video PID
or the PCR PID. The SMATV mode is used to special purposes on satellite master
antenna TV system.
Enter the Transponder’s Frequency by using the numeric buttons on your RCU.
Enter the Transponder’s Symbol Rate by using the numeric buttons on your RCU.
Choose the Type of polarization, either the Horizontal or the Vertical.
This Network Search menu can be used if the Search mode is turned to the Manual
or Auto mode. If the Network Search menu is turned on and the NIT(Network
Information Table) is available, the Transponder’s information can be found.
C. Frequency
D. Symbol Rate
E.Polarization
F. Network Search
