OK
OK
OK
OK
V+ V-
OK
OK
the LNB at the dish via cable to the STB.
For the LNB Settings, highlight the INSTALLATION menu and press . Then,
set the cursor to the LNB Setting section and press .
A
. Satellite Name
Press the button to display the Satellite List box. The Satellite name list is put
in alphabetical order. Select one of the preprogrammed satellites that correspond
to the value of the antenna. In other words select one of the already
searched services at the first installation. If the desired satellite name is not in the
list, then select “Others”.
B
. LNB Frequency
Select the L.O. Frequency set to antenna. The LNB Frequency of 5150, 9750,
10600, 10750, 11475 MHz or Universal can be selected by using the buttons.
NOTE: If the Universal LNB is selected, both 9750 and 10600 MHz are
supported at the same time, and therefore the 22 KHz tone setting is not required.
C
. LNB Power
Select LNB power ‘
On
’ for internal and ‘
Off
’ for external.
D
. 22 KHz
If using a Dual LNB or two antennas connected to a 22 KHz tone switch
box, make 22 KHz tone switch enable or disable to select LNB or antenna.
E. 12V
Use it if the switch box is controlled by 12V DC.
F. DiSEqC 1.0
The STB is designed to be DiSEqC 1.0 compatible. This allows multiple antennas
to be connected to the STB at the same time. If using two or more fixed antennas
or LNBs, then it is recommended to use a DiSEqC 1.0 switch.
Select from 1 to 4 of DiSEqC, Mini A/B, or Disable according to the option
or the configuration of DiSEqC switch box or antenna.
G. Channel Search
It is used to go to channel search menu directly from LNB setting menu.