Topfield TF 6000 PVR ES User Manual Download Page 14

Page: 14 / 110

Introduction

displays teletext.

V.Format

changes video resolution. See §

3.2.5

for more

details.

A/R

changes aspect ratio. See §

3.2.4

for more details.

switches between television services and radio ser-

vices.

GUIDE

displays the electronic programme guide.

AUX

switches the output of the

SCART socket be-

tween the digital receiver and the device connected to
the

VCR

SCART socket. See §

3.2.3

for more details.

SAT

displays the satellites list with their services list. It is

also used to swap the sub-picture with the main picture.
See §

5.6

for more details.

displays the main menu. It is also used to return

to the previous menu from a submenu.

EXIT

is used to exit the current screen.

is used to start recording.

is used to stop playback, to stop recording, or to jump

back to live television from time-shifted television.

is used to display the list of recorded programmes

that are stored on the internal hard disk drive. See §

7.2

for more details.

resumes normal playback speed, or displayes the

progress bar for navigation on playback or time shift. To
play a recorded programme, see button

pauses live television or playback of a recorded pro-

gramme.

is used to start reverse playback. Subsequent presses

increase the rewind speed.

Summary of Contents for TF 6000 PVR ES















































































































Search results

Summary of Contents for TF 6000 PVR ES

Reviews:

Related manuals for TF 6000 PVR ES

Brands by name

Popular brands

Topfield TF 6000 PVR ES, User Manual

Search results

Summary of Contents for TF 6000 PVR ES

Reviews:

Related manuals for TF 6000 PVR ES

Brands by name

Popular brands