3.5 Adjusting the On-Screen Display
21
3.5
Adjusting the On-Screen Display
You can adjust the transparency level of the On-Screen Dis-
play (OSD). Select the
System Setting
menu and set the
OSD
Transparency
option as you desire. Its available range is 0 to
50 percent.
You can adjust the display time of the information box. For the
information box, see §
5.2.3
. To adjust its display time, select
the
System Setting
menu and set the
Info Box Display Time
option as you desire. Its available range is 1 to 30 seconds. If
you set this option to
No Info Box
, the information box will not
be displayed when you switch services. However, pressing
the
button will display the information box. If you set
this option to
Never Hide
, the information box will always be
displayed.
In addition, you can raise or lower the position of the informa-
tion box. Select the
System Setting
menu and set the
Info Box
Position
option as you desire. Its available range is
−
10 to
+
3
lines. The higher you set the option, the lower the information
box will be positioned.
3.6
Displaying the time in standby mode
You can display the current time on the front display in standby
mode. To display the time, select the
System Setting
menu and
set the
Standby Mode
option to
Active standby
. Otherwise, set
it to
Passive standby
. When you set the
Standby Mode
option
to
Active standby
, the receiver can also bypass the signal from
the antenna.
Summary of Contents for TBF - 7110
