Topfield TBF - 7110, User Manual

Page: 23 / 48

3.3 Local time setting 17
the other is a decoded signal. If your digital audio system does
not have a Dolby Digital decoder, you have to set the
Dolby
Output option to PCM . Otherwise, set it to Bitstream .
NOTE
If the service you are currently watching does not provide
Dolby digital, you cannot watch the programme with Dolby
sound even though you set the
Dolby Output
option to
Bit-
stream .
If the service you are watching provides Dolby digital, the
Dolby sound could be low. If so, set the
DRC Type option to
RF Mode to increase the sound.
3.3 Local time setting
You should set your local time for timer events.
Select the System Setting > Time
Setting menu. You should see a
screen like the left figure.
You can set the clock manually
or use the time signal, Green-
wich Mean Time (GMT), carried
as part of the digital television
broadcast.
To use Greenwich Mean Time,
take the following steps:
1. Set the Mode option to Auto ; then the Time Offset option
becomes enabled.
2. Set the Time Offset option to the time difference between
your time zone and GMT referring to Table 3.1 .
3. Make sure that your local time is correctly displayed on
the Local Time option.