EN
22
23
4.Viewing Freeze Frame Data
Press and hold the “ ” or “ ” to select “
View Freeze Frame
” on
“
Diagnostic Menu
” and press “
ENTER
” to continue.
If more than one module is detected, you will be prompted to select a
module before test. Press and hold the “ ” or “ ” button to select
a module.
1)
2)
Choose “
YES
” to confirm erasing.
Wait a few seconds or press any key to return to “
Diagnostic Menu
”.
If you want to proceed with erasing the codes, press “
ENTER
” button
to erase.
If the codes are cleared successfully, an “
Erase Done!
” message will
display.
If the codes are not cleared, an “
Erase Failure. Turn Key on with Engine
off!
” message will display.
2)
4)
3)
▼
▼
▲
▲
