23
2.3
Measuring
Light Source With Directivity
Data having good reproducibility sometimes cannot be obtained when observing a light source
with high directivity such as an LED or an uneven light source. If this happens, perform
measurement using a white board as shown below.
2.4
Using the Instrument in Another System
When using the instrument in another system such as an XY stage, install it on the system using
the jig attachment screws on the base of the instrument.
Also, connect the instrument to a PC using the RS-232C or USB interface.
When using the unit in a system, refer to the following.
☞
「
4.
Communication with a PC
」
☞
「
Appendix: External Dimensions
」
Light source
White board
RD-80SA
Luminance = measurement value L x
luminance factor
Summary of Contents for RD-80SA
Page 1: ...Instruction Manual Luminance Colorimeter Rev 6...
Page 2: ......
