Topcon KR-1W Instruction Manual Download

Page: 35 / 188

BASIC OPERATIONS

CHANGING THE MEASUREMENT MODE

MEASUREMENT MODE

Select the desired measurement mode by pressing the Mode button of the control panel.

・

No.

COUNT

CYL

[ - ]

VD 12.00

COUNT

MODE

SETTINGS

ALL CLEAR

DATA OUT

ANALYZE

AUTO TRACKING

DATA LIST

MANUAL

AUTO

Patient

Fixed Target Brightness

Four measurement modes are available: REF/KRT measurement, REF measurement
and KRT measurement and pupillometry can be selected.

REF/KRT measurement mode (R/K) : REF and KRT measurements are performed con-

tinuously.

REF measurement mode (REF)

: Only REF measurement is performed.

KRT measurement mode (KRT)

: Only KRT measurement is performed.

Pupillometry mode

: Brightness of the fixation target is changed and

pupil measurement is performed.

Tap the Mode button. A popup menu is displayed.

Summary of Contents for KR-1W





























































































































































































Search results

Summary of Contents for KR-1W

Reviews:

Related manuals for KR-1W

Brands by name

Popular brands

Topcon KR-1W, Instruction Manual

Search results

Summary of Contents for KR-1W

Reviews:

Related manuals for KR-1W

Brands by name

Popular brands