Topcon KR-1W, Instruction Manual

Page: 17 / 188

15
COMPONENTS
(11) Progress measurement function ON display
Displayed when the progress measurement function is ON. (see
page 51)
DETAILS OF FUNCTION BUTTONS
(1) MODE button (3) ALL CLEAR button (5) ANALYZE button
(2) SETTINGS button (4) DATA OUT button
(1)
MODE button
Measurement mode is changed. (See page 33.)
R/K (REF/KRT continuous measurement), REF (REF measure-
ment), KRT (KRT measurement) and Pupillometry can be selected.
: REF/KRT continuous measurement
Analysis of refractive wavefront aberration and corneal
wavefront aberration can be done using the obtained
results.
: REF measurement
Analysis of refractive wavefront aberration can be done
using the obtained results.
: KRT measurement
Analysis of corneal wavefront aberration can be done
using the obtained results.
: Pupillometry
By automatically changing the brightness of the fixation
target, it is possible to analyze refractive wavefront
aberration when changing the pupil size.
(2)
SETTINGS button
Used for setting conditions for measurement operations. (See page
95.)
(3) ALL CLEAR
S ・ ・ ・
C
・ ・ ・
A
・ ・ ・
button
Clears all measurement data.
(4) DATA OUT button (Measurement data transmitting button)
Prints measurement data by the internal printer. Upon printing, data
is transmitted to the connected external device. When measurement
results are saved, the lamp blinks to orange.
(5)
ANALYZE button
The display goes to the ANALYSIS RESULT screen. (See page 62.)