Topcon KR-1W, Instruction Manual

Page: 64 / 188

62
DISPLAYING THE MEASUREMENT RESULT
ANALYSIS RESULT SCREEN
The KR-1W can perform REF/KRT measurements and aberration measurements by capturing
Hartmann Shack and Mire images of the patient's eye. After the measurement, tap the
ANALYZE button to display analysis results on Measurement Result List Screen.
(4) Function button
(3) Layout Change button
(2) Data Feed button
Mire image
Wavefront aberration
map
Hartmann image
(The figure shows a multi map.)
Pull down menu
(1) R-L Change button
(5) Analysis result
(1) R-L Change button Changes eyes (right/left).
(2) Data Feed button Moves to the analysis result to the next data, or returns to the pre-
vious data.
(3) Layout Change button Displays the measurement result by changing it to the previously
set layout pattern. Four layout types can be registered. Pressing
the
Select Layout button at the right most, a pull down menu
for layout selection is displayed.
(4) Function button A list of operable functions is displayed. Select a relevant button
by the touch panel.
RESULT LIST button
Changes to Result List display mode.
SETTIGNS button
Performs various settings. For details, see page 95.
S
・ ・ ・
C
・ ・ ・
A
・ ・ ・
CLEAR button Clears only the data currently displayed.
DATA OUT button
When the external printer is set, the displayed analysis
result can be outputted to the external printer. For details
about the external printer, see "SETTING OF EXTERNAL
PRINTER (PRINT EXT)" on page 117.
When measurement results are saved, the button blinks in
orange.
The output layout for the external printer can be set. For
details, see "SETTING OF EXTERNAL PRINTER (PRINT
EXT)" on page 147.