Topcon KR-1 User Manual Download Page 53

Page: 53 / 76

SETTING FUNCTIONS ON SETUP SCREEN

REF/KRT

(Print setting on

R/K mode)

Print order

DATA

Measurement values are printed in terms of

REF or KRT.

DATA

R/L

Both REF measurement value and

KRT measurement value are printed

in order of right eye and left eye.

OFF

VD value (Vertex distance) is not printed.

VD value (Vertex distance) is printed.

Cylinder sign

OFF

Cylinder sign is not printed.

Cylinder sign is printed.

REF format

ALL

All the measurement value is printed.

ALL

AVE

Only averaged is printed.

Credibility

OFF

Credibility number is not printed.

OFF

Credibility number is printed.

S.E.

OFF

S.E.is not printed.

S.E. is printed.

OFF

PD value (pupil distance) is not printed.

PD value (pupil distance) is printed.

ADD

OFF

ADD value is not printed.

OFF

ADD value is printed.

KRT

print order

D/mm

KRT data is printed as follows,

D (corneal refractive power)/mm (corneal curvature).

D/mm

mm/D

KRT data is printed as follows,

mm (corneal curvature)/D (corneal refractive power).

KRT format

ALL

All the measurement value is printed.

ALL

AVE

Only typical value are printed.

KRT style

Kerato style in print out is HV (horizontal/vertical).

R1R2

Kerato style in print out is R1R2 (flat/steep meridian).

KRT

print format

KRT measurement result is printed in simple format.

Simple

R1R2

KRT measurement result is printed in full format.

KRT average

OFF

KRT average value is not printed.

KRT average value is printed.

KRT cylinder

OFF

Kerato-cylinder value and axial angle are not printed.

Kerato-cylinder value and axial angle are printed.

Corneal

diameter

OFF

Corneal diameter is not printed.

Corneal diameter is printed.

REF

(Print setting on

REF mode)

OFF

VD value (Vertex distance) is not printed.

VD value (Vertex distance) is printed.

Cylinder sign

OFF

Cylinder sign is not printed.

Cylinder sign is printed.

REF format

ALL

All the measurement value is printed.

ALL

AVE

Only averaged is printed.

Credibility

OFF

Credibility number is not printed.

OFF

Credibility number is printed.

S.E.

OFF

S.E.is not printed.

S.E. is printed.

OFF

PD value (pupil distance) is not printed.

PD value (pupil distance) is printed.

ADD

OFF

ADD value is not printed.

OFF

ADD value is printed.

Description

Options

Details

Initial value

Summary of Contents for KR-1













































































Search results

Summary of Contents for KR-1

Reviews:

Topcon KR-1, User Manual, Page: 53 / 76

Search results

Summary of Contents for KR-1

Reviews: