Topcon HiPer II, Operator'S Manual

Page: 50 / 140

Pre-survey Preparation
HiPer II Operator’s Manual
2-6
Close the connection between a receiver and computer/controller via
RS-232 cable (see step 6 described in “Establishing a Serial Cable
Connection” on page 2-4).
To establish a connection to the receiver via Bluetooth, take the
following steps:
1. Press the
power
button on the receiver to turn it on.
2. Run TRU.
3. Click
Device Application mode
and select
Receiver
Managing
mode.
4. Click
Device Connect
. The
Connection Parameters
dialog box
displays. To establish a Bluetooth connection select Bluetooth in
the
Connect Using
field and click button to search the
devices with Bluetooth.
Figure 2-3. Searching Bluetooth Devices
5. After finishing the search of Bluetooth-enabled devices, select the
desired receiver in the
Select Port
dialog box and click
OK
. To
establish the connection to the receiver, press the
Connect
button
in the
Connection Parameters dialog
box. When detecting the
receiver, the
Detecting Receiver
dialog box displays (Figure 2-4
on page 2-7).
HiPerII_OM.book Page 6 Wednesday, December 15, 2010 9:07 AM