Topcon GTS-230N, Instruction Manual

Page: 70 / 184

6-20
6 SPECIAL MODE (Menu Mode)
6.4.4 Systematic Error of Instrument Correction (only for GTS-233N/235N/236N)
Setting ON/OFF for error correction of collimation and horizontal axis for angle measurement.
Note: Perform this item after complete Section 17.5 “Adjustment of Compensation Systematic Error of
Instrument”.
6.4.5 Selecting Battery Type
On-board battery BT-32Q can be also available for GTS-230N series. When you use BT-32Q (Ni-Cd)
battery select [Ni-Cd] type of battery in this parameters 1 menu.
If you select wrong type of battery, the battery remaining display may work incorrectly.
BT-52QA: Ni-MH battery type, BT-32Q: Ni-Cd battery type.
3
Press the [F3] key.
The data previously set is shown.
If already ON, the display shows tilt correction
value.
[F3]
4
Press the [F1](X-ON) key or [F2](XY-ON) or
[F3](OFF) key, and press the [F4](ENTER) key.
[F1]~[F3]
[F4]
Operating procedure Operation Display
1
After pressing the [MENU] key, press the [F4](P
↓
)
key twice to get the menu on page 2.
[MENU]
[F4]
[F4]
2
Press the [F1] key.
[F1]
3
Press the [F4] key.
[F4]
4
Press the [F1] key.
The data previously set is shown.
[F1]
5
Press the [F1](ON) key or [F2](OFF) key, and
press the [F4](ENTER) key.
[F1] or [F2]
[F4]
Operating procedure Operation Display
1
After pressing the [MENU] key, press the [F4](P
↓
)
key twice to get the menu on page 3/3.
[MENU]
[F4]
[F4]
2
Press the [F1] key and press the [F4](P
↓
) key to
get the menu on page 2.
[F1]
[F4]
TILT SENSOR:[XY-ON]
X: 0°02'10"
Y: 0°03'00"
X-ON XY-ON OFF ENTER
MENU 3/3
F1:PARAMETERS 1
F2:CONTRAST ADJ.
P
↓
PARAMETERS 1 1/3
F1:MINIMUM READING
F2:AUTO POWER OFF
F3:TILT P
↓
PARAMETERS 1 2/3
F1:ERROR CORRECTION
F2:BATTERY TYPE
F3:HEATER P
↓
ERROR CORR. [OFF]
F1:ON
F2:OFF
ENTER
MENU 3/3
F1:PARAMETERS 1
F2:CONTRAST ADJ.
P
↓
PARAMETERS 1 2/3
F1:ERROR CORRECTION
F2:BATTERY TYPE
F3:HEATER P
↓