Topcon GTS-230N, Instruction Manual

Page: 26 / 184

2-6
2 PREPARATION FOR MEASUREMENT
z Setting Tilt Correction by Soft Key
To enable you to select tilt ON/OFF function. setting is not memorized after power is OFF.
[Example] Setting X, Y Tilt OFF
Operating procedure Option Display
1
Press [F4] key to get the function page 2.
[F4]
2
Press [F1](TILT) key.
In case ON is already selected, the display shows
tilt correction value.
[F1]
3
Press [F3](OFF) key.
[F3]
4
Press [ESC] key.
[ESC]
z The setting mode performed here will not be memorized after powering OFF. To set TILT correction in
the initialized setting (it is memorized after powering OFF), see Section 6.4.3 “Vertical and Horizontal
Angle Tilt correction (Tilt ON/OFF)”.
V : 90°10'20"
HR: 120°30'40"
0SET HOLD HSET P1
↓
TILT REP V% P2
↓
TILT SENSOR:[XY-ON]
X:-0°00'25"
Y: 0°00'20"
X-ON XY-ON OFF ---
TILT SENSOR: [OFF]
X-ON XY-ON OFF ---
V : 90°10'20"
HR: 120°30'40"
0SET HOLD HSET P1
↓