Topcon GLS-1500 Series, Instruction Manual

Page: 58 / 88

6-3
6 PROJECT SETTINGS
6.2 Selecting from Existing Projects
[Example] Select project name: p02
4
Input project name [p03].
(Refer to Chapter 4.8 “File Name Input Assistant
Function” if you wish to use the file name whose
last digit is counted up sequentially.)
Input
project
name
5
Press the [ENT] key.
Project "p03" is set.
[ENT]
6
Input occupied point name [a-1].
(Refer to Chapter 4.8 “File Name Input Assistant
Function” if you wish to use the file name whose
last digit is counted up sequentially.)
Input
Occupied
point name
7
Press the [ENT] key.
Occupied point name "a-1" is set.
[ENT]
Operating procedure Operation Display
1
Press the [F3] (
↓
) key to display the second page
of the main menu.
[F3]
2
Press the [F1](PROJECT MENU) key.
[F1]
3
Press the [F2](SELECT PROJECT) key.
[F2]
4
Select the project [p02] by pressing the [F2] or [F3]
key.
[F2] or [F3]
5
Press the [F4](SELECT) key.
Project "p02" is selected.
[F4]
NEW PROJECT
INPUT PROJECT NAME
[p03 ]
ALP BS <- ->
NEW STATION
INPUT STATION NAME
[ ]
NUM BS <- ->
NEW STATION
INPUT STATION NAME
[a-1 ]
ALP BS <- ->
PROJECT MENU
F1 NEW PROJECT
F2 SELECT PROJECT
MAIN MENU
F1 STATION MENU
F2 SCAN MENU
P1/2
↓
MAIN MENU
F1 PROJECT MENU
F2 SETTING MENU
P2/2
↑
PROJECT MENU
F1 NEW PROJECT
F2 SELECT PROJECT
SELECT PROJECT
→
p01
p02
↑ ↓
SELECT
SELECT PROJECT
p01
→
p02
↑ ↓
SELECT
PROJECT MENU
F1 NEW PROJECT
F2 SELECT PROJECT