D4023-EN
TMR3610 Operators Manual
37
13.3 Ingredient Re-name
Ingredient names are listed in a standard table and can be changed using the following steps:
13.4 Print Ingredients Names
1. Repeatedly press
until
displays.
2. Press
quickly and hold for three
seconds.
3. Then first ingredient is shown. Use UP
or DOWN arrows to select ingredients
to edit. (Press RIGHT arrow to display
pens. Press LEFT arrow to display
ingredients)
4. Press
again to edit ingredient.
Display briefly shows
and flashing
cursor is displayed.
5. Press and hold
, erases ingredient
6. Press “1” key once enters 1, twice
enters A, three times for B, other
numbers on keypads work the same.
7. Pause for one second after entering a
number/letter and they shift to the left.
8. Press
.
9. When done entering ingredients,
press
to exit.
1. Repeatedly press
until
is
displayed.
2. Press
quickly and hold for three
seconds.
3. Press
, prints total accumulations
for ingredient displayed.
4. Press
again prints accumulations
for all currently used recipes.
5. Press
again, prints names for all
ingredients. Ingredients not used by
recipe and shows unused.
6. When being printed, DATA will have a
flashing arrow.
1
1
2
2
3
3
3
3
3
4
4
5
5
6
6
7
8
9
Manual Programming of Recipes
