20
TMR3610 Operators Manual
D4023-EN
9.0 DATA TRANSFER
9.1 USB Drive Mode
9.2 RF Datalink Modes
Operation
Message
DataLink connects with indicator
DataLink sends data to indicator
Indicator receives data
Data complete, indicator sends data to
DataLink
Data sending
To send data to PC if operator does not
complete all feeding at end of feeding
schedule. Press
until display shows
message (right column), press
to
perform transfer.
The indicator marks uncompleted data as completed and sends feeding data to
DataLink.
NOTE
: Indicator may also be manually programmed.
To upload data:
Insert USB Drive.
1. Press
or
.
Note: If indicator displays, Warning—unused
recipes found in EZ—Press
to load new
recipes from USB drive –Press
to exit.
Remove USB drive when complete.
To download data:
Insert USB Drive, indicator automatically sends
data to USB Drive. Remove USB Drive.
Data Transfer
