Topcon BM-7A, Instruction Manual

Page: 95 / 96

Warranty Period
One year from the date of shipment
Repairs during the Warranty Period
Failure occurs to the instrument when the instrument has been operated according to the instruction
manual and, the failure caused by design or manufacture will be repaired free of change.
Repairs after the Warranty Period
Repair after the warranty period is carried out if possible and have to be paid in full by the user.
Maintenance Period
Parts for maintenance and repair (*1) are kept in stock for 8 years (*2) after the purchased product
was manufactured.
The repairable period is this period that parts are kept in stock.
Even after the storage period has elapsed, there are cases in which repair may be possible, so contact
the dealer or Topcon Technohouse Corporation.
(*1) Maintenance and repair parts are parts that are necessary to maintain the function of the
product.
(*2) We make our most effort to keep maintenance and repair parts in stock for the complete
storage period, however, due to some unexpected occurrence, the storage period may have to
be shortened.
California, U.S.A only
This product contains a CR Lithium Battery which
Contains Perchlorate Material－special handling may apply
See www.dtsc.ca.gov/hazardouswaste/perchlorate
When you ask for service, advise us of the following data.
・ Manufacturing serial number Located on the Name plate on the bottom of the device.
・ Period of use The date of purchase of the instrument, and date of last calibration.
・ Operating conditions Type of light source measured, device settings, measurement values,
measurement state, etc.
・ Problem Description of the trouble as much detail as possible.
Make inquiries to the address indicated on the base of the instruction manual.