Topcon BM-7A, Instruction Manual

Page: 46 / 96

3. Various Settings
44
4
After setting has been completed, press the [ENTER] button.
・ If a mistake is made during input of the numerical value, complete the procedure to step 4
then start over again from step 1.
3.2 Standard sample
After the power has been turned ON, first the measurement value of the standard sample from
when difference measurement was performed is displayed.
Display Method
☞
「3.1.2 Data/Setting Item Display」
In difference measurement, the difference value is displayed with this measurement value as a
reference.
Difference Measurement
☞
「2.3 Difference Measurement」
・ Not displayed when there are no data.
・ The display mode can be changed using the MODE switch.
☞
「2.6 Measurement Value Display Mode」
・ Cannot be changed from just the display.
3.3 White Board
The white board measurement value from when the object color was measured is displayed.
Display Method
☞
「3.1.2 Data/Setting Item Display」
Object Color Measurement
☞
「2.5 Object Color Measurement」
・ Not displayed when there are no data.
・ Displayed by XYZ regardless of the display mode.
・ Cannot be changed from just the display.
Memo
Memo
＊ Ｓｔａｎｄａｒｄ ｓａｍｐｌｅ ＊
ｘ＝ ０．２２７９
ｙ＝ ０．２６１５
Ｌ＝ ８．１００Ｅ＋０２ ｃｄ／ｍ＾２
Memo
＊ Ｗｈｉｔｅ ｂｏａｒｄ ＊
Ｘ＝ １．０２０Ｅ＋０３
Ｙ＝ １．０００Ｅ＋０３ ｃｄ／ｍ＾２
Ｚ＝ １．１４３Ｅ＋０３